Keep more of the steel job
Structural steel laser cutting machine
A structural steel laser cutting machine can bring more beam, pipe and profile work onto your floor. Match the stock shape, length and weight to the machine before choosing laser power.
COLOSSUS PROFILE cuts plate, pipe and beams on one gantry. HYDRA 4 serves large pipe, while VIPER 24 handles smaller tube, angle, channel and H-sections.
Bring several jobs to one gantry
COLOSSUS PROFILE combines plate, pipe and profile cutting in a 28000 × 3250 mm processing area. Power ranges from 12-40 kW.
Work with real stock
COLOSSUS PROFILE adjusts for bent or offset profiles. Its listed profile range is 100 × 100 to 1500 × 600 mm.
Keep large pipe moving
HYDRA 4 12070 handles round pipe from Ø50-730 mm and stock up to 12500 mm long. Its four moving chucks support loading and cutting together.
Match smaller structural work
VIPER 24 lists angle sides and channel or H-section webs from 15-240 mm. Stock length is up to 6500 mm, with a maximum tube weight of 300 kg.
Bring bevel work to the head
COLOSSUS PROFILE uses FANUC servo motors on its bevel head. The head lists 360° rotation and ±135° tilt for access around the work.
The machines
Pick your Cyclops
Fiber laser cutter for plate, tube and profiles
COLOSSUS PROFILE
Bring the plate, pipe and beam work under one roof.
- Length
- 28 m
- Round pipe
- Ø100-1200 mm
- Power
- 12-40 kW
- Accuracy
- 0.1 mm
Heavy-duty four-chuck tube laser
HYDRA 4
Take on bigger pipe. Keep the next job moving.
- Round tube
- up to Ø730 mm
- Stock length
- 12.5 m
- Chucks
- 4
- Power
- 6-20 kW
Two-chuck tube laser cutter
VIPER 24
Turn more tube and structural work into finished parts.
- Round tube
- Ø15-240 mm
- Stock length
- 6.5 m
- Y speed
- 120 m/min
- Chuck
- 120 r/min
FAQ
Questions buyers ask
Can a fiber laser cut H-beams?+
COLOSSUS PROFILE and VIPER 24 both list H-beam work. COLOSSUS PROFILE lists a profile range of 100 × 100 to 1500 × 600 mm. VIPER 24 lists channel and H-section webs from 15-240 mm, so the full section still needs a fit check.
Which machine handles large round pipe?+
COLOSSUS PROFILE lists round-pipe-only capacity of Ø100-1200 mm, and HYDRA 4 12070 lists Ø50-730 mm. COLOSSUS PROFILE also has a separate square-and-round-pipe range of 200-850 mm. Review the pipe setup and handling plan for the chosen range.
How does HYDRA 4 reduce handling time?+
HYDRA 4 uses a 2+2 chuck layout so loading and unloading can happen during cutting. All four chucks move to help shorten the leftover tail. The layout is designed for heavy pipe and structural stock.
Can one machine cut plate, pipe and profiles?+
COLOSSUS PROFILE handles all three with one gantry. Its station layout lets one station load while another cuts. Check each stock type against its own listed capacity.
What details should I send for a structural laser quote?+
Send the section shape, outside size, wall thickness, stock length and weight, plus the cuts and bevels you need. Include the part mix and how you plan to load stock. An engineer replies personally with a setup matched to the work.
Put a Cyclops on your floor
Tell us what you make. An engineer replies personally with the right machine and a quote.