High-speed enclosed fiber laser cutter

VULCAN 3015New

Turn quick moves into more parts per shift.

2-year warranty at 12 kW and below. Every machine runs for 72 hours, then cuts for 12, before it ships.

Cyclops VULCAN 3015 high-speed enclosed fiber laser cutter

Speed: 180 m/min
Accel.: 2 G
Table swap: 19-25 s
Accuracy: ±0.03 mm/m

Put VULCAN 3015 to work

Put VULCAN to work on busy nests and repeat orders. A light beam changes direction fast while the heavy base keeps it steady. Table swaps take 19 to 25 seconds, so the next sheet can get to work sooner.

Carbon steelStainless steelAluminumGalvanized steelBrassCopper

Aluminum-alloy beam

Move quickly between cuts

The aluminum-alloy beam keeps moving weight down for faster direction changes.

Low center of gravity

Hold steady at speed

A low, heavy base helps keep the machine stable as the beam speeds up and slows down.

Follow-up zoned extraction

Clear fumes where you cut

Zoned extraction follows the head to draw fumes from the active cutting area.

Mineral fire-proof bed

Handle the cutting heat

The mineral bed lining helps resist heat distortion during heavy cutting.

Check the specs

The numbers behind the work

Work area	3100 × 1550 mm (5 × 10 ft)
Positioning accuracy	±0.03 mm/m
Repositioning accuracy	±0.02 mm
Max. running speed	180 m/min
Max. acceleration	2 G
Z-axis travel	325 mm
Table exchange time	19-25 s
Operator screens	2 × 21.5 in
Footprint	9100 × 2280 × 2210 mm
Machine weight	5980 kg

Know your machine

What goes to work for you

Laser source	MAX Photonics fiber
Cutting head	BOCI
Guide rails	German-made
Pneumatics	SMC (Japan)
Chiller	Precision dual-temperature
Dust extraction	Included

Equip it for your work

Safety light curtain
Enclosed down-draft extraction
Automatic load and unload line

FAQ

Questions buyers ask

What work area does VULCAN 3015 provide?+

VULCAN 3015 lists a 3100 × 1550 mm work area in a 5x10 format. Its footprint is 9100 × 2280 × 2210 mm. Plan room around the machine for loading and service.

How fast does VULCAN exchange tables?+

VULCAN lists a table exchange time of 19-25 seconds. That is the table swap, not the full time to unload parts and place a new sheet. Its maximum running speed of 180 m/min describes machine motion, not every material's cutting speed.

What laser power and warranty does VULCAN offer?+

VULCAN offers laser power up to 12 kW. Its lasers fall within the 2-year warranty for power at 12 kW and below. Match power to your material, thickness and part mix.