Two-chuck tube laser cutter

VIPER 24Best seller

Turn more tube and structural work into finished parts.

2-year warranty at 12 kW and below. Every machine runs for 72 hours, then cuts for 12, before it ships.

Cyclops VIPER 24 two-chuck tube laser cutter

Round tube: Ø15-240 mm
Stock length: 6.5 m
Y speed: 120 m/min
Chuck: 120 r/min

Put VIPER 24 to work

Bring tube, angle, channel and H-beam work in-house with VIPER 24. Cast jaws grip the stock evenly. Moving supports help limit sway on long parts. With stock up to 6.5 m, you have room to take on more.

Round tubeSquare tubeRectangular tubeAngle ironChannelH-beam

1.5 G, 8 Hz engine

Move quickly to the next cut

With 1.5 G Y-axis acceleration, VIPER 24 speeds up and changes direction quickly between cuts.

Cast cross jaws

Hold your stock steady

Cast cross jaws spread the grip evenly and help keep dust out of the chuck.

Dual support

Support your longer parts

Servo follow-up and wheel supports help limit sway and bounce as the tube moves.

Five-axis jump

Spend less time repositioning

The head lifts, moves and lowers in one combined motion to shorten time between cuts.

Check the specs

The numbers behind the work

Max. tube length	6500 mm
Round tube	Ø15-240 mm
Square tube	15 × 15 to 240 × 240 mm
Rectangular tube	21 mm < diagonal < 335 mm
Angle	15-240 mm side
Channel / H-section	web 15-240 mm
Positioning accuracy	±0.05 mm/m
Repeatability	±0.03 mm/m
Y-axis speed	120 m/min
Y-axis accel.	1.5 G
Chuck speed	120 r/min
Max. tube weight	300 kg
Shortest tail	40 mm straight / 90 mm bevel
Footprint	9730 × 2730 × 2080 mm

Know your machine

What goes to work for you

Laser source	MAX Photonics fiber
Control	FSCUT3000 (bevel version available)
Cutting head	BLT series, matched to power
Servo motors	INOVANCE
Reducer	KOFON
Chiller	HanLi

Equip it for your work

Bevel head
Automatic bundle loader (Ø20-160 mm, 3 t)
Semi-automatic loader (5 tubes at a time)

VIPER 24 chuck holding round tube under the cutting head

VIPER 24 cast cross-jaw chuck and bevel head

FAQ

Questions buyers ask

What stock sizes can VIPER 24 handle?+

VIPER 24 lists round tube from Ø15-240 mm and square tube from 15 × 15 to 240 × 240 mm. Maximum stock length is 6500 mm and maximum tube weight is 300 kg. Check rectangular and structural sections against their separate listed limits.

How short is the leftover tail on VIPER 24?+

VIPER 24 lists a shortest tail of 40 mm for straight cutting and 90 mm for bevel cutting. A bevel head is an option. Review the part and chuck setup when planning stock use.

What power and warranty come with VIPER 24?+

VIPER 24 offers 1.5-12 kW. All listed powers fall within the 2-year warranty for lasers at 12 kW and below. Choose the setup around your tube material and wall thickness.