Coil-fed laser cutting line

COIL LINE

Go from coil to parts. Handle less cut sheet.

2-year warranty at 12 kW and below. Every machine runs for 72 hours, then cuts for 12, before it ships.

Cyclops COIL LINE coil-fed laser cutting line

Coil width: 500-1500 mm
Power: 1.5-6 kW
Feed accuracy: 0.5 mm
Leveling: ±1.5 mm/m²

Put COIL LINE to work

Bring high-volume blank cutting into one flow with COIL LINE. It uncoils, levels, cuts and unloads the stock. Feed the laser straight from coil to reduce the cut sheet you need to handle and store.

Appliance panelsHVAC partsCabinetsHigh-volume blanks

Four steps, one line

Keep the job in one flow

Uncoil, level, cut and unload in one line to reduce moves between steps.

Continuous cutting

Keep material moving

Feed stock and unload parts during cutting to reduce pauses between steps.

Fully enclosed

Keep the cut enclosed

A full enclosure surrounds the cutting area as stock moves through the line.

Check the specs

The numbers behind the work

Model	COIL LINE 3015
Materials	Carbon, galvanized, cold-rolled and stainless steel
Coil width	500-1500 mm
Feeding accuracy	0.5 mm
Leveling accuracy	±1.5 mm/m²

FAQ

Questions buyers ask

What coil stock can COIL LINE process?+

COIL LINE lists widths from 500-1500 mm. Its material list covers carbon, galvanized, cold-rolled and stainless steel. Review the stock and part mix with an engineer.

Which steps does COIL LINE combine?+

COIL LINE combines uncoiling, leveling, laser cutting and unloading. Stock feeds and parts unload during cutting to help reduce pauses. A full enclosure surrounds the cutting area.

What power and warranty come with COIL LINE?+

COIL LINE offers 1.5-6 kW. Its laser falls within the 2-year warranty for lasers at 12 kW and below. Match power to the material and blank-cutting work you plan to run.