Get your crew ready to run
Put your Cyclops to work
The right machine is the start. Help your crew put it to work with installation and training support. An engineer replies personally, before and after the sale.
Get a quoteFrom your next job to your shop floor
- 01
Start with your work
Tell us what you make and the jobs you want next. An engineer replies personally.
- 02
Find your fit
Share your materials, thickness and volume. An engineer matches the machine, power and options to your parts.
- 03
Prove it in the cut
Every machine runs for 72 hours, then cuts for 12 hours before it ships. Yours goes through both tests.
- 04
Get your crew ready
Get remote help with installation and setup. On-site engineers can help install the machine and train your crew.
- 05
Put the guides to work
Manuals, wiring diagrams and cut tables ship with your machine. Keep the details your crew needs close to the work.
Tested before it reaches your floor
13 checks before it ships
Steady cuts start with a stable frame. Checks cover the frame, rails and axis accuracy, then run-in and cutting tests. ISO 9001 quality system. CE and FDA certified.
- 01Frame welding
- 02Heat treatment to relieve stress
- 03Natural aging
- 04Rough machining
- 05Sandblast and powder coat
- 06Finish machining
- 07Rail straightness by laser collimator
- 08Squareness on a granite bed
- 09Rack alignment check
- 10Hardness test
- 11Laser interferometer accuracy test
- 1272-hour run-in
- 1312-hour cutting test
Plan your setup
Share your floor layout and the work you want to run. An engineer can help you plan installation.
Match your shop power
Share your shop voltage. An engineer can help match the setup and check whether you need a transformer.
Warranty
3 years on lasers above 12 kW. 2 years on lasers at 12 kW and below.
Equip for the work
Review the air compressor, dust collector, chiller and transformer needs with an engineer as you plan your setup.