Plan for more finished parts
Cyclops vs Trumpf
Trumpf belongs on your list if you want sheet and tube lasers with loading and part sorting. Its TruLaser range gives you several ways to plan the work around your parts.
Compare the whole job, from loading stock to taking parts off the table. Cyclops Laser offers TITAN shuttle tables, BRONTES for busy nests and COLOSSUS for large plate up to 60 kW. An engineer replies personally to help you match the machine to your work.
Side by side
Trumpf vs Cyclops
What each brand lists on its own website, read on November 2, 2026. Specs change, so check the sources below before you buy.
| Trumpf | Cyclops | |
|---|---|---|
| US contact | TRUMPF Inc., Farmington, Connecticut | Call or WhatsApp (847) 987-3762. An engineer replies personally. |
| Top sheet laser power listed | 50 kW (TruLaser Series 8000) | 60 kW (COLOSSUS) |
| Tube lasers | TruLaser Tube series, flagship 12 kW | 6 tube series, 1.5-20 kW, with 2, 3 or 4 chucks |
| Automation | Loading up to fully automated storage and part sorting | TOWER storage, LIFT sheet loaders, FEED tube loaders, COIL LINE, FACTORY LINE |
Fair is fair
When Trumpf may fit
- You value a long company history. Trumpf was founded in 1923.
- You want sheet and tube laser options. Trumpf lists TruLaser sheet machines and the TruLaser Tube series.
- You plan to link cutting with material handling. Trumpf lists loading, automated storage and part sorting.
Why shops choose Cyclops
Spend more of the shift cutting
TITAN lets you load one pallet while the other cuts. BRONTES uses fast direction changes to help shorten moves between cuts on busy nests.
Make room for larger plate
COLOSSUS offers 6-60 kW for large plate work. Its gantry runs on separate ground rails to help keep the plate steady during cutting.
Get help with your setup
Call or WhatsApp (847) 987-3762. An engineer replies personally. Engineers can help with installation and training as you bring cutting in-house.
Start with a tested machine
Every machine runs a 72-hour run-in and a 12-hour cutting test before it ships. Manuals, wiring diagrams and cut tables ship with it.
Machines to look at
Start here
High-speed fiber laser cutter
BRONTES
Make short moves count. Cut more parts per shift.
- Accel.
- 4 G
- Speed
- 200 m/min
- Power
- 6-40 kW
- Accuracy
- 0.03 mm
Enclosed fiber laser cutter with shuttle table
TITAN
More cutting. Less waiting on the next sheet.
- Power
- 1.5-40 kW
- Accuracy
- 0.03 mm
- Speed
- 120 m/min
- Accel.
- 1.5 G
Ground-rail large-format plate cutter
COLOSSUS
Go after the plate jobs that outgrow other tables.
- Power
- 6-60 kW
- Length
- 12-20 m
- Width
- up to 4 m
- Speed
- 80 m/min
FAQ
Questions buyers ask
Is Cyclops a good Trumpf alternative?+
Cyclops is worth comparing if you need sheet or tube cutting with options for loading and storage. TITAN has enclosed shuttle tables, and COLOSSUS handles large plate work. Match the machine to your parts, material and floor space.
How does Cyclops power compare with Trumpf?+
The listed Trumpf TruLaser Series 8000 reaches 50 kW. Cyclops COLOSSUS offers 6-60 kW. Compare those figures with the bed size, material, plate thickness and loading plan for the models you need.
What should I compare when choosing between Trumpf and Cyclops?+
Start with the parts you run most. Compare bed size, power, tube capacity and how stock moves through the job. Review installation, training and the documents that come with the machine. Cyclops ships manuals, wiring diagrams and cut tables.
What warranty does Cyclops offer?+
Cyclops offers 3 years on lasers above 12 kW and 2 years at 12 kW and below.
Put both quotes on the table
Tell us what you cut and how much. An engineer replies personally with the build that fits.
Sources for Trumpf facts
Trumpf is a trademark of its owner. Cyclops Laser is not affiliated with or endorsed by Trumpf. Facts were read from Trumpf's public pages on November 2, 2026. Cyclops specs come from our machine pages.